I figured I'd pass this along since some people may be in the market. Contact info is in the thread below.

<!-- m --><a class="postlink" href="http://forum.44cup.com/viewtopic.php?f=15&t=2166">http://forum.44cup.com/viewtopic.php?f=15&t=2166</a><!-- m -->

For Sale: Go Pro Hero 2 Camcorders. Brand new, Never used.

944 Cup price: $183, includes Go Pro Hero 2 camcorder, waterproof housing, 1 rechargeable lithium-ion battery, 1 flat quick release adhesive mount, 1 pivot arm, and 1 USB cable. Price includes shipping in the U.S. Limited quantities available. Includes 1 year factory warranty.

This is a similar to the Optima deal from last year and the year prior: <!-- l --><a class="postlink-local" href="http://mmsports.org/forum/viewtopic.php?f=3&t=9736">viewtopic.php?f=3&t=9736</a><!-- l -->

Hey all-

Haven't had time to document my work recently, will document more once April and May roll around before I relocate.

Up here is a Carrera with significant defects- marring, heavy swirling and the drivers door which was burned and unfinished from a body shop- you'll see the pics.

Correctional was performed over two days and took around 15 hours to complete.

Equipment used:
- FLEX DA
- RUPES 21
- PC 7424
- various pads- yellow/ green foam and Surbuf R
- M105, Menz SIP, Sonax PF

LSP applied- two coats of Menzerna PL


Interior was given a Full Basic treatment- interior carpet and mats exracted, leather conditioned with Leatherique overnight and all the hard plastic cleaned and degreased.
Quick shot of the rear seats out and getting leatheriqued


Onto the befores:

Dull, oxidized and heavily swirled paint










Sanding marks






The Heavily defected area- thanks body shop!




Full Decon wash was performed- Sonax FE wheel cleaner/ Iron Cut to help the inner barrels- Megs. APC in the wells and profile of the tire- Dawn/ CG Citrus wash mix
Uber Blue clay after with ONR to clay the surface





Under the lights- near 99% correction achieved
My camera was low on battery and had to be charged- only snapped a couple 50/50 and before and afters






The heavily defected door....


After two passes with M105



Headlights were wetsanded with with 1500 grit on up to 3K and hand polished/ hit with my PC and a small 3 inch pad



Afters







































Thanks for looking!
- Dan K.

Taking a day to myself tomorrow and going to futz around on the car. Hopefully a coolant flush, lower grille work, install a short shifter & boost gauge.

Got access to a heated garage space, so if you're stuck in Harrisonburg and bored, let me know. 8ish till lunch? Will spring for eats.

Hey guys. I'm picking up Chris P's E30 (Sorry DJ) on Saturday. Who would like to let me borrow or come with me to grab it? I will pay for lunch and dinner if it takes that long and of course gas. The car is in Henrico, I am in Fredericksburg. Sooooo, who's interested?

Looks like some serious hardware is gonna drop this week at Geneva, not the least of which, is the 991 GT3:

:bow:

<!-- m --><a class="postlink" href="http://jalopnik.com/2014-porsche-911-gt3-this-is-it-450987702?utm_campaign=socialflow_jalopnik_twitter&utm_source=jalopnik_twitter&utm_medium=socialflow">http://jalopnik.com/2014-porsche-911-gt ... socialflow</a><!-- m -->

The production P1 will be unveiled as well (although there's not much left to mystery at this point), the Ferrari hypercar, and hopefully BMW will finally show the F30 M3.

Looking to sell an extra one of these i had laying around. It's for the older Xbox models (obviously, i think all new ones have it built in).

$30 + shipping, OBO

Like the title says, jerkwads. Need hoon wheels for the Blurple Power.

Ideal would be some stock 05-07 STI BBS's, but I am not picky.

For those of you that don't pay attention to FB I am looking for a replacement for the jeep.

I've decided a 04-08 Forester 2.5XT, 5spd should fit the bill nicely.

If during your internet browsing sessions you can keep an eye out for one.

I don't think I want to spend over $11k.
04-08 2.5XT only, 04-05 will prob be the only ones in my price range.
Around 100k is cool, timing belt work being done is preferable at that mileage.
Prefer any color other than the red, but I'm open to it.
5spd.
I'm willing to travel a descent distance if need be.

Gracias.

So in November of 2011 I sold my 97' TJ because I was a wimp and was scared to beat on it. I still owed a little on it (bought it in high school), had way too much money dumped in it, and it wasn't my daily driver at the time. It sat most of the time and I wrenched on it so it could be an awesome lawn ornament. Here she is, right before I finished the tube fenders...



At that time, I had had 2 XJ's previously to my TJ, and I knew I wanted to go back. So after selling the TJ, I was on the hunt for a 97+ XJ that was in running shape and had an AW4. My plan was to buy a fairly beat one that ran good, but I wouldn't be scared to thrash. Well, things never go as planned. I came across an ad on Craigslist that I was sure was a scam, but took the bait anyways. Basically, I ended up with this:


1999 XJ with 130k miles, clean, almost perfectly straight body, and the poor college girl said she was selling it because she couldn't afford to fix it. Apparently, she thought it needed a radiator. I gave her $1600 cash, drove it home, put a radiator CAP on it, leak fixed. :mrgreen:

Interior was gross, but cleaned up well....



Well, I knew what I wanted to do. Plan was to keep my suspension height at around 3" over stock on 35" tires. So I pieced together some 3" springs, an add a leaf, some junk RC shocks, and a Clayton track bar w/ a Clayton bracket...



Annnnnnnndddd done....



Wheeled it all gay like and burned the tires off on the ice in GWNF....



So then I started getting it ready for 35's....





At some point ( maybe after the 35's?) I swapped in an 8.25 29 spline...

Whirlpool Gold Electric Microwave Oven Combo
27 inch width
Oven Model #GMC275PR001 (This model # should show both as it is really only 1 piece)
Microwave Model #GMC305
White
Like new condition
For sale because my mom hated the white fridge we had so she went all stainless. Keeping the fridge for the basement so this is up for sale.

$400 for MM
Pick Up Only
Located in Elkridge, MD. 5 minutes of 95 and 15 minutes south of baldimore