i'd go blades as well, but si wheels are best on that bad boy... were on it when i bought it, but moved them to my [then] gf's corolla. most ballin' '96 corolla out there...
make sure they fit the front brakes, though. the si wheels BARELY did. i'm talking less than 3mm. blades look to be a roomier design, but when we're talking that close, it's worth checking.
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
Blades look fine for driving to and from the track. Paint em black and they will look even better. If you leave the tires mounted when you spray the wheels, it makes the tires look new also. Don't even need to tape anything off
Sent from my Droid using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
i like a lot of honda OEM wheels and the blades are great. they really seem to fit that body style.
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
Well im planning on meeting up with the guy either OTW to or OTW from the BRR AutoX, so hopefully the tires are legit, and the wheels are straight.
What's your plan for the header?
Current:
- 1993 325is Black/Black 97 STX Christine
-2015 Ford Fiesta ST OW Ms Fiesty
Past:
-2002 Ford Ranger 4.0 XL 5MT AKA Goldy Locks
xvxax Wrote:What's your plan for the header?
currently installed, running open header.
I... see....
Current:
- 1993 325is Black/Black 97 STX Christine
-2015 Ford Fiesta ST OW Ms Fiesty
Past:
-2002 Ford Ranger 4.0 XL 5MT AKA Goldy Locks
still trying to decide to order a test pipe or extend the cat piping, im kinda of running out of time though.....
extend the cat. For now, you can get a piece of slip pipe and run two clamps if you're crazy cramped for time. When you need to, you could just pull the midpipe off and send it to a welder already mocked up at the correct length.
Current:
- 1993 325is Black/Black 97 STX Christine
-2015 Ford Fiesta ST OW Ms Fiesty
Past:
-2002 Ford Ranger 4.0 XL 5MT AKA Goldy Locks
Run catless like navin and be super loud. "loud pipes save lives."
2005 White STi
don't paint blades in good shape black.
I Am Mike
4 wheels: '01 RAV4 (Formerly '93 Civic CX, '01 S2000, '10 GTI, '09 A4 Avant)
2 wheels: '12 Surly Cross-Check Custom | '14 Trek Madone 2.1 105 | '17 Norco Threshold SL Force 1 | '17 Norco Revolver 9.2 FS | '18 BMC Roadmachine 02 Two | '19 Norco Search XR Steel (Formerly '97 Honda VFR750F, '05 Giant TCR 2, '15 WeThePeople Atlas 24, '10 Scott Scale 29er XT, '11 Cervelo R3 Rival, '12 Ridley X-Fire Red)
No longer onyachin.
Sully Wrote:Paint em black and they will look even better.
Do not paint the blades black ever. :evil:
2019 Accord Sport 2.0 A/T
2012 Civic Si - Sold
You right, paint them red or lime green...or be hella frush and paint them white. Sorry, I'm not good with hondas :dunno:
Sent from my Droid using Tapatalk
2004 Honda S2000
2001 F-150 4X4 6" lift on 37" tires
2007 GSX-R 600
2008 SX-R 800
1992 (slammed by PO) 240sx Coupe (SOLD)
1999 BMW POS ///M3(SOLD)
1998 Honda Civic EX beater (SOLD)
xvxax Wrote:extend the cat. For now, you can get a piece of slip pipe and run two clamps if you're crazy cramped for time. When you need to, you could just pull the midpipe off and send it to a welder already mocked up at the correct length.
Biggest reason i havent just done this is because i need a bung hole for the o2
JustinG Wrote:bung hole
:lol:
(09-25-2019, 03:18 PM)V1GiLaNtE Wrote: I think you need to see a mental health professional.
.RJ Wrote:JustinG Wrote:bung hole
:lol:
thought someone would get a kick out of that
Sully Wrote:You right, paint them red or lime green...or be hella frush and paint them white. Sorry, I'm not good with hondas :dunno:
Sent from my Droid using Tapatalk
No, don't paint them at all. From what I know they're hard to find, so moar stock is moar bettar.
Now:
'16 Ram 1500 | '97 BMW M3 | Some Press Loan
Then:
87 BMW 325e | 91 BMW 535i | 96 BMW 328i | 95 BMW 325i | 95 Mazda Miata | 13 Focus ST | 09 BMW 128i | 00 Pontiac Firebird | 05 Yukon Denali | 96 BMW 328iC | 11 Ford F-150 | 06 BMW M3 | 10 Range Rover SC | '03 Ford Ranger | '18 Ford F-150 | '01 BMW X5 | '98 Volvo S70 T5M
You need whitewalls and red steelies for street newayz bro
lol dont paint them... just use them to go to and from... and sell them off later
#99 - 2000 Civic Si (Future H2 Car, Former H1 car)
IPGparts.com, AutoFair Honda, Amsoil, QuikLatch Fasteners
NASA-MA Tech Inspector (Retired)
Jake Wrote:moar stock is moar bettar. :thumbup:
2019 Accord Sport 2.0 A/T
2012 Civic Si - Sold
|
