09-20-2005, 01:56 AM
Maybe a suggestion for new people trying to learn Heel/toe is to first learn how to rev-match. The easiest one to start out with would be 4th to third gear. Lets say your cruising at 3000rpm in 4th gear, shove in the clutch, blip(and I mean blip, dont spend more than a half-second hitting the gas) and let the clutch out half-way slowly at first when your learning as you have it shifted into third. Once you get this perfect you should be able to slam down the clutch, blip throttle, and literally totally lift the clutch off without a slight hesitation of the eninge other than engine braking.
After this is perfected, work on the other gears in the same exact way. Once youve got all this down, you understand the concept of heel/toe and all you need to do is rotate your ankle a little bit while braking to blip the throttle, also, if your doing it fast enough, may not need to do anything more than a very light tap of the gas pedal.
After this is perfected, work on the other gears in the same exact way. Once youve got all this down, you understand the concept of heel/toe and all you need to do is rotate your ankle a little bit while braking to blip the throttle, also, if your doing it fast enough, may not need to do anything more than a very light tap of the gas pedal.
2020 Ford Raptor
2009 Z06
1986.5 Porsche 928S
2009 Z06
1986.5 Porsche 928S