09-22-2020, 12:51 PM
I forgot to update but things still sort of happening in fits and spurts
![[Image: 5CB65F4D-7041-4C65-93B4-1C07D49B4D0D-907...042-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-c4FHJdW/0/70282162/X3/5CB65F4D-7041-4C65-93B4-1C07D49B4D0D-9079-000004C45D62C042-X3.jpg)
+2mm forged pistons
![[Image: IMG_0209-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-PqT5jZX/0/f335ea59/X3/IMG_0209-X3.jpg)
![[Image: IMG_0897-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-GTtD4Kw/0/a315a6cc/X3/IMG_0897-X3.jpg)
not bad for rattlecan
![[Image: IMG_1100-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-hNh5QXC/0/13480067/X3/IMG_1100-X3.jpg)
Cylinder head out getting refreshed (valves, guides, seats, porting) and cam is off at megacycle getting re-ground so once those come back I can finish motor assembly, put it in the frame and finish hooking everything else up.
![[Image: 5CB65F4D-7041-4C65-93B4-1C07D49B4D0D-907...042-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-c4FHJdW/0/70282162/X3/5CB65F4D-7041-4C65-93B4-1C07D49B4D0D-9079-000004C45D62C042-X3.jpg)
+2mm forged pistons
![[Image: IMG_0209-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-PqT5jZX/0/f335ea59/X3/IMG_0209-X3.jpg)
![[Image: IMG_0897-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-GTtD4Kw/0/a315a6cc/X3/IMG_0897-X3.jpg)
not bad for rattlecan
![[Image: IMG_1100-X3.jpg]](https://photos.smugmug.com/Galleries/Project-1972-CB350/i-hNh5QXC/0/13480067/X3/IMG_1100-X3.jpg)
Cylinder head out getting refreshed (valves, guides, seats, porting) and cam is off at megacycle getting re-ground so once those come back I can finish motor assembly, put it in the frame and finish hooking everything else up.
