Put the old man to work on the hood scoop over Thanksgiving. Shouldn't have any sort of issues out of it in the future and the big ugly gap is gone. Just need to put the finishing touches on it and paint it.
![[Image: 46513571_10156907553506810_6798365864388...e=5CA35DC8]](https://scontent.fric1-1.fna.fbcdn.net/v/t1.0-9/46513571_10156907553506810_6798365864388198400_o.jpg?_nc_cat=102&_nc_ht=scontent.fric1-1.fna&oh=a38798d85825d1ce27b93d58106a21c6&oe=5CA35DC8)
![[Image: 46968785_10156907554801810_6124564548813...e=5C66598B]](https://scontent.fric1-2.fna.fbcdn.net/v/t1.0-9/46968785_10156907554801810_6124564548813848576_o.jpg?_nc_cat=104&_nc_ht=scontent.fric1-2.fna&oh=fb1c8cae05f6ca248579bc52b769a9e4&oe=5C66598B)
Bought his 360 block off of him as well. Not committing to building it until I have my 318 apart. It really wouldn't need much more than machining, a rotating assembly, cam and heads to be a good +100-150hp swap. If the issue is just the valve guides I'll probably fix the 318 and run it. If it's not the heads at all and somewhere in the block then it's getting parted out. The cylinder walls on the 318 block had some imperfections but I was told by the machine shop they likely wouldn't cause any issues, they may have been wrong there. We'll see I'll probably start getting it ready to come out tonight after I get some good footage of it running in case I do end up selling it.
Bought his 360 block off of him as well. Not committing to building it until I have my 318 apart. It really wouldn't need much more than machining, a rotating assembly, cam and heads to be a good +100-150hp swap. If the issue is just the valve guides I'll probably fix the 318 and run it. If it's not the heads at all and somewhere in the block then it's getting parted out. The cylinder walls on the 318 block had some imperfections but I was told by the machine shop they likely wouldn't cause any issues, they may have been wrong there. We'll see I'll probably start getting it ready to come out tonight after I get some good footage of it running in case I do end up selling it.