01-03-2018, 04:11 PM
got the other wall totally cut out and matched up to the first in our cold snap down here. i think i'm still warming up a day later. nothing meaningful to see since its just a re-run of the sequence i posted earlier, but its pretty damn cool to see both walls structurally ready to mount to the chassis.
currently too cold here for me to be able to start applying the inner wall skins, Titebond doesn't recommend you use it below 45 degrees and its definitely below that. so the trailer is back in its corner, looking forlorn with stuff piled all over it. by this weekend we'll be back in the 50's and it'll be time for more progress.
coming up:
• glue 1/8" birch sheets to the wall cores, and trim with laminate router bit
• stand walls up, glue/screw lower wall skirt to the floor, add rear galley kitchen bulkhead
• currently shopping lighting fixtures and a solar setup for boondocking...weeeee!
currently too cold here for me to be able to start applying the inner wall skins, Titebond doesn't recommend you use it below 45 degrees and its definitely below that. so the trailer is back in its corner, looking forlorn with stuff piled all over it. by this weekend we'll be back in the 50's and it'll be time for more progress.
coming up:
• glue 1/8" birch sheets to the wall cores, and trim with laminate router bit
• stand walls up, glue/screw lower wall skirt to the floor, add rear galley kitchen bulkhead
• currently shopping lighting fixtures and a solar setup for boondocking...weeeee!
2010 Civic Si
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT
2019 4Runner TRD Off-Road
--------------------------
Past: 03 Xterra SE 4x4 | 05 Impreza 2.5RS | 99.5 A4 Quattro 1.8T | 01 Accord EX | 90 Maxima GXE | 96 Explorer XLT