07-28-2004, 10:02 AM
Do you have stock cams?
People are pushing 44+ lbs/min (~375 fwhp) with the Evo3 16G, albeit with a few more supporting mods than you. It's a very capable turbo.
If you can get your 60' times below 2 seconds (as you know, I'm sure), your times will improve drastically. I'd highly recommend a new suspension setup to reduce weight transfer on launch. Slip your clutch a lot and feather the accelerator when you detect wheelspin. If you're not doing a burnout, then make sure you steer AROUND the water in the staging lanes.
Chris
P.S. At what RPM is your launch limiter set? You have NLTS active on DSMLink v2, correct?
People are pushing 44+ lbs/min (~375 fwhp) with the Evo3 16G, albeit with a few more supporting mods than you. It's a very capable turbo.
If you can get your 60' times below 2 seconds (as you know, I'm sure), your times will improve drastically. I'd highly recommend a new suspension setup to reduce weight transfer on launch. Slip your clutch a lot and feather the accelerator when you detect wheelspin. If you're not doing a burnout, then make sure you steer AROUND the water in the staging lanes.
Chris
P.S. At what RPM is your launch limiter set? You have NLTS active on DSMLink v2, correct?