+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project 1997 ITR #280 (/showthread.php?tid=9518)
Project 1997 ITR #280 - JPolen01 - 02-01-2013
Damn this thing is going to be fucking clean when it's done. Props to you.
Re: Project 1997 ITR #280 - navin - 02-01-2013
It actually won't be that clean -- really wish I did somethings differently. The exterior of the car has its fair shair of dings. But it'll be nice to have something to drive around as a fun car once its all said and done.
As for "Not Understanding" it -- well there is nothing to really understand. It's a car, that I'm modifying like everyone else on here most likely does. I just took it another redirection because I wanted to.
hrug: .RJ probably 'gets it'
Re: Project 1997 ITR #280 - .RJ - 02-01-2013
navin Wrote:.RJ probably 'gets it'
RJ <3 honda showkars
Re: Project 1997 ITR #280 - navin - 02-25-2013
Welp, slight work done this weekend.
- Fixed motor mount threads
- Installed front and rear sway bars
- Installed the SS lines (95% done)
- Cleaned up some chasis harness wiring
- Dash and Carpet roughly installed
![[Image: 8504913925_5801bf9cab_c.jpg]](http://farm9.staticflickr.com/8231/8504913925_5801bf9cab_c.jpg)
.
.
![[Image: 8506021936_93afc609d7_c.jpg]](http://farm9.staticflickr.com/8086/8506021936_93afc609d7_c.jpg)
So basically need to order some misc. stuff that I haven't grabbed yet, along with timing belt + crankshaft gear to button up all stuff. Then clutch/flywheel, and another B-pipe.
Re: Project 1997 ITR #280 - Dave - 02-25-2013
navin Wrote:That exhaust looks hilariously out of place.
Re: Project 1997 ITR #280 - navin - 02-25-2013
Yep -- Previous owner had some ghetto rigged setup on there. Need to go pick up a replacement B-pipe (it's not on one of the hangers). Or are you talking about how its just fugly looking
Re: Project 1997 ITR #280 - .RJ - 02-25-2013
Need to get some buddy club bling on that hooptie
Re: Project 1997 ITR #280 - navin - 02-25-2013
I have the buddy club camber kits that came with the car.. +3124324 Hot import night points!
Re: Project 1997 ITR #280 - navin - 04-04-2013
Picked up a few things here and there, and started sorting through the orders from Acura to clear up some space..
![[Image: 8542478541_380fff7b33_c.jpg]](http://farm9.staticflickr.com/8522/8542478541_380fff7b33_c.jpg)
.
.
Spinnarz
.
![[Image: 8617036645_289bcc284c_c.jpg]](http://farm9.staticflickr.com/8111/8617036645_289bcc284c_c.jpg)
.
.
Exedy clutch, and Fizanda Flywheel. Now to con some people to come over and help me take the motor off the stand.
.
![[Image: 8618143034_b3257c06e3_c.jpg]](http://farm9.staticflickr.com/8121/8618143034_b3257c06e3_c.jpg)
.
.
Messed around with getting the front end together. Still a couple of brackets to figure out, and the bumper/fender brackets. :thumbdown:
Some other boring stuff was done, but baby steps to get the ball rolling on this POS.
- Master cyl. bench bled
- Fuel lines cut for AN fittings
Re: Project 1997 ITR #280 - D_Eclipse9916 - 04-04-2013
navin Wrote:Exedy clutch, and Fizanda Flywheel. Now to con some people to come over and help me take the motor off the stand.
Looking good, let me know when I need to bring the hoist over.
Re: Project 1997 ITR #280 - Kaan - 04-04-2013
D_Eclipse9916 Wrote:navin Wrote:Exedy clutch, and Fizanda Flywheel. Now to con some people to come over and help me take the motor off the stand.
Looking good, let me know when I need to bring the hoist over.
NOW... so he doesnt need a hand getting the engine off the stand lol.
Re: Project 1997 ITR #280 - navin - 04-04-2013
That's the plan -- Be happy you don't live down the street anymore, or else I'd be bothering you to come wrench.
Re: Project 1997 ITR #280 - Kaan - 04-04-2013
you never did when i lived down the street... it hurt my man feelings.
Re: Project 1997 ITR #280 - CaptainHenreh - 04-04-2013
Looks like a real live car. :thumbup:
Re: Project 1997 ITR #280 - navin - 04-05-2013
Kaan -- come over and help me assemble some AN lines.. I'm scurred!
Re: Project 1997 ITR #280 - Kaan - 04-05-2013
which ones did you get? did you get the cutting tool?
Re: Project 1997 ITR #280 - navin - 04-05-2013
Basically doing an inline fuel filter setup to delete the ugly stock filter -- I have a line cut, and am using a fitting so I don't have to flare the line. Everything is -6.
AN Cutting tool..? You mean tape that bitch up withs some electrical tape and then take the angel grinder to it?
Re: Project 1997 ITR #280 - Kaan - 04-05-2013
just remember to blow out your lines. it shouldnt be too hard... you arent a newb.
Re: Project 1997 ITR #280 - navin - 04-14-2013
Got a bit done this weekend..
.
.
.
![[Image: 8649168711_cf1c5e349c_c.jpg]](http://farm9.staticflickr.com/8396/8649168711_cf1c5e349c_c.jpg)
Re: Project 1997 ITR #280 - V1GiLaNtE - 04-15-2013
^ OH my.... I love when this thing gets updates.. Keep it up!