+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project: Integra Type Dickbutt (/showthread.php?tid=10678)
Re: Project: Integra Type Dickbutt - Kaan - 10-22-2015
one comment about the cold and we have almost a page talking about lifts. i'm not that old yet, i can handle working off the ground a little longer.
Re: Project: Integra Type Dickbutt - D_Eclipse9916 - 10-22-2015
navin Wrote:That 'lift' the Corvette is on looks sketchy as fuck, but would be awesome to use for DIY alignments if it has something to roll the car back a bit on.
If you don't want to deal with drilling into concrete, and somewhat portable if you have a truck to take to the track then look into the quickjack bl-3500. Saw some coupons online selling them for $850 shipped.
Didn't you order one? And the whole point is to get *YOU* off the ground. The quickjack doesn't get you off the ground, just replaces a jack and jackstands.
I got no room to stand-on, I have been saying I need to insulate my garage for years and have yet to do so. It's getting cold again and I am whining about not insulating it..for like the 3rd year in a row :lol:
Re: Project: Integra Type Dickbutt - Senor_Taylor - 10-22-2015
I'm just looking to DJ for inspiration here because I have a bad back too. I was bent over too long a couple weeks ago doing my brakes and I haven't been able touch my toes since. Lifts are a life saver.
Sent from my SM-G900R4 using Tapatalk
Re: Project: Integra Type Dickbutt - navin - 10-22-2015
nah, ain't ballin' like you..!
Re: Project: Integra Type Dickbutt - Kaan - 10-22-2015
Throw an insulation party at your house and i'll bring tools and shit.
I need to "save" for my seats and more pimpy shocks (either sending these in or droping $$$ on better shocks). seats first and shocks as a long term goal lol. koni yellows are great for what i have now.
Re: Project: Integra Type Dickbutt - D_Eclipse9916 - 10-22-2015
Kaan Wrote:Throw an insulation party at your house and i'll bring tools and shit.
I need to "save" for my seats and more pimpy shocks (either sending these in or droping $$$ on better shocks). seats first and shocks as a long term goal lol. koni yellows are great for what i have now.
I do have 2x Sparco Evos for sale for $800.
Re: Project: Integra Type Dickbutt - Kaan - 10-22-2015
i'm short and round... Sparcos dont fit me well at all. the ones that did fit me the belt holes were above my ears lol
Re: Project: Integra Type Dickbutt - rherold9 - 10-22-2015
D_Eclipse9916 Wrote:I do have 2x Sparco Evos for sale for $800.
Tempting.... don't do this to me.
Sent from my SM-G900V using Tapatalk
Re: Project: Integra Type Dickbutt - D_Eclipse9916 - 10-22-2015
rherold9 Wrote:D_Eclipse9916 Wrote:I do have 2x Sparco Evos for sale for $800.
Tempting.... don't do this to me.
Sent from my SM-G900V using Tapatalk
DOOOO IT. You have until I find a factory Z06 Driver's side Seat till they go away.
Re: Project: Integra Type Dickbutt - Kaan - 10-24-2015
i guess i'll be one of the first kids on the block... new PCI front upper control arms.mad tight camber (5 degrees if i wanted lol)... Polen would be proud.
![[Image: new%20upper%20control%20arms_zps8axiy1mq.jpg]](http://s883.photobucket.com/user/JMURACN/media/new%20upper%20control%20arms_zps8axiy1mq.jpg.html)
Re: Project: Integra Type Dickbutt - JPolen01 - 10-24-2015
You did well kid.
Re: Project: Integra Type Dickbutt - V1GiLaNtE - 10-24-2015
Damn. That's some serious hardware right there. What's the lifespan on the "balljoint" or whatever joint that is? Looks to be completely metal on metal just like a heims joint.
Re: Project: Integra Type Dickbutt - Kaan - 10-24-2015
V1GiLaNtE Wrote:Damn. That's some serious hardware right there. What's the lifespan on the "balljoint" or whatever joint that is? Looks to be completely metal on metal just like a heims joint.
I'll be one of the first to find out
Re: Project: Integra Type Dickbutt - rherold9 - 10-25-2015
Man that is gon' feel nice and snappy now
Sent from my SM-G900V using Tapatalk
Re: Project: Integra Type Dickbutt - Kaan - 10-25-2015
It's a snap ring rebuild... Quick and easy
Re: Project: Integra Type Dickbutt - D_Eclipse9916 - 10-26-2015
Kaan Wrote:i guess i'll be one of the first kids on the block... new PCI front upper control arms.mad tight camber (5 degrees if i wanted lol)... Polen would be proud.
I am glad its powderocated. Based on that design, I would do a nut-and-bolt after the first session on track and check for cracks and bending. Can never be too careful when you are prototyping someone else's design.
Also, take the boots off your old control arms and pop them on that spherical. Since you live down a nice dusty road, itll help keep crap out of that heim joint.
Re: Project: Integra Type Dickbutt - Kaan - 10-26-2015
these have been tested on some HC cars out in Cali. they arent prototypes anymore, i'm just one of the first outside the prototypers to get their hands on them. that being said, i'll still be doing a nut and bolt check
Re: Project: Integra Type Dickbutt - Kaan - 11-09-2015
The Dickbutt is retired for the winter. With only a 3 event season she held up pretty well. I have a lot of plans I hope I can get to (and afford) over the winter.
Summit Main Nov7-8… HPDE 1 and 2
Cabell can fill you in on HPDE 1… but in group 2 I spent Saturdays first session shaking off some rust. It was cold, the motor liked it and the tires did not. My instructor asked me in my first session why I was in group 2… I told him it was only my 3rd event back from a long absence… while bombing around he suggested I go to group 3.
About that time I reeled in a first gen MR2 it had some issues… somewhere between 1 and 2 he puffed a big cloud of smoke, covered my windshield in oil, and had me practicing for a US Drift event. I stayed on the pavement, came around, and had the guy black flagged. After the session I was walking by and they had lost cylinder 3.
After my second session with the instructor, giving me some off line drills and goals for the day… I was solo. Ryan sorta has some video of me flying off track in turn 10. Overheated street tires (which I felt and didn’t really register) didn’t help the cause but I probably should have used a little more brake lol. The rest of the day was good to go.
Sunday my instructor jumps back in the car. He tells me he watched me in the carousel and I’m giving up time. “I’m going to give you new gears to be in and stay quiet… you tell me how it goes.” So I started using 2nd in turn one and turn 5… I don’t breath off after turn 6 to make the adjustment for 7, I’m supposed to shift to 3rd and carry 3rd through 9. It all seems to work out pretty well, I’m pick up speed and climbing turn 9 much faster…. So half way through the session he tells me to heal toe into 1 (like I have been doing for turn 3) and heal toe 5… but all while trail braking. I spent the day alone in the car working on my footwork… I’m at about 50% successful doing this at threshold… lots of practice in my future
My last session of the day I goofed off with a street tire E36 M3 in group 2. He would catch me under braking in 1 and 5… I’d leave him well behind at 3 and the carousel. It was pretty fun. I found myself being better off with someone behind me or someone in front of me. I guess I needed some motivation.
Future issues: (AKA $$$$)
1. My off in turn 10 made me realize I need to get some equipment in the car
2. While I carry speed about as well as I can, I need tires… the street tires are also pretty shot
3. The use of 2nd gear as exposed the weakness of my 3rd gear synchros … there might be a need for a transmission “soon.”
4. The brand new HP+ pads did pretty well for the weekend but they are basically done. Both instructors were surprised how deep the HP+ and 460 TW tires would allow the car to go into the brake zones…. But upgrades need to be made for my sanity.
5. Cabell and I burned 41 gallons of fuel … and the engine clicked 240k miles on Sunday somewhere around Turn 10. In 50 degree weather the engine oil was still hitting 265 degrees… I “might” want a cooler.
6. The rear of the car is fine… but this winter I need to give the front suspension an overhaul… but I almost might have a wheel bearing going out in the rear lol
My instructor told me to go to group 3
![[Image: Group%203_zpspukmka5p.jpg]](http://s883.photobucket.com/user/JMURACN/media/Group%203_zpspukmka5p.jpg.html)
For now I’ll take that is group 2 with instructor at VIR and group 2 solo at Summit… when I get the equipment I’ll check ride up.
Re: Project: Integra Type Dickbutt - .RJ - 11-09-2015
I can help you rebuild the gearbox. Its easy
Re: Project: Integra Type Dickbutt - JPolen01 - 11-09-2015
I love the "might need this" or "might be broken". Nice work!