The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Madison Motorsports
Project: 2012 DGM WRX - Printable Version

+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project: 2012 DGM WRX (/showthread.php?tid=10134)

Pages: 1 2 3 4 5 6 7 8 9 10

Re: Project: 2012 DGM WRX - FlaakCM - 01-04-2013

WRXtranceformed Wrote:If I had to do it all over again with a turbo Subie, it would be real simple (especially with the improvements they have made over the years since I owned mine):
Full exhaust
Intake
Fuel pump
Meth / Water injection
A tune
Better tires and maybe some springs.

That's really all you need to have stupid fun with those cars.

Would you stay on the stock IC or upgrade to a FMIC?

Re: Project: 2012 DGM WRX - FlaakCM - 01-04-2013

JPolen01 Wrote:Nice choice on the third brake light. I've always loved the edm/jdm rear fog or third brake lights.

Thanks.

I am still undecided on whether to wire it as a brake light or as an additional taillight (to remain on when the lights are on)

Re: Project: 2012 DGM WRX - WRXtranceformed - 01-04-2013

FlaakCM Wrote:
WRXtranceformed Wrote:If I had to do it all over again with a turbo Subie, it would be real simple (especially with the improvements they have made over the years since I owned mine):
Full exhaust
Intake
Fuel pump
Meth / Water injection
A tune
Better tires and maybe some springs.

That's really all you need to have stupid fun with those cars.

Would you stay on the stock IC or upgrade to a FMIC?

I don't know enough about the newer WRXs to comment. On the older ones, I probably would have left it alone honestly. The stock one really didn't suck and the meth would allow that system to run super safe and awesome.

Edit: I just saw that you asked about a FMIC. I would never upgrade to a FMIC unless you were going to push serious hp.. I had a beefy TurboXS TMIC when my old WRX was stage 4.

Re: Project: 2012 DGM WRX - FlaakCM - 01-04-2013

WRXtranceformed Wrote:Edit: I just saw that you asked about a FMIC. I would never upgrade to a FMIC unless you were going to push serious hp.. I had a beefy TurboXS TMIC when my old WRX was stage 4.

I had been looking at the Process West TMIC if i ever wanted to upgrade the IC. However, Im not really sure as to the benefit it might give me other than the standard improvments moving to a larger/thicker core. 1K is hard to justify in cost.

Re: Project: 2012 DGM WRX - JPolen01 - 01-04-2013

FlaakCM Wrote:
JPolen01 Wrote:Nice choice on the third brake light. I've always loved the edm/jdm rear fog or third brake lights.

Thanks.

I am still undecided on whether to wire it as a brake light or as an additional taillight (to remain on when the lights are on)
I vote for wire it as a taillight to remain on with the others. Something about that extra light just looks so good. Plus juan for staying with the top mount. FMIC are all for looks unless you are pushing serious power. It does look cool though.

Re: Project: 2012 DGM WRX - FlaakCM - 01-04-2013

JPolen01 Wrote:I vote for wire it as a taillight to remain on with the others. Something about that extra light just looks so good.

I believe that is exactly what I am going to do. the only other thing i have been debating is whether or not to tint the housing so it doesnt stand out when it isnt on, but is clearly seen when the light is on. I would just use tinted Lamin-x so it is removable instead of using dark shades tinting spray.

Re: Project: 2012 DGM WRX - WRXtranceformed - 01-04-2013

FlaakCM Wrote:
WRXtranceformed Wrote:Edit: I just saw that you asked about a FMIC. I would never upgrade to a FMIC unless you were going to push serious hp.. I had a beefy TurboXS TMIC when my old WRX was stage 4.

I had been looking at the Process West TMIC if i ever wanted to upgrade the IC. However, Im not really sure as to the benefit it might give me other than the standard improvments moving to a larger/thicker core. 1K is hard to justify in cost.
I would stick with the TMIC if you ever decide to upgrade and keep the turbo stock or close to stock size (like a VF34 if kids still use those nowadays). My buddy had an FMIC on his stock turbo / tuned WRX and it just made it a little laggier. I had one for the GT35R on my old STi, but that's a different situation altogether.

Re: Project: 2012 DGM WRX - FlaakCM - 01-04-2013

i'd say so. the GT35R is a larger turbo. Wish i couldve seen that beast.

The current stock WRX turbos are VF52 and the current stock STi turbos are VF48.

Re: Project: 2012 DGM WRX - WRXtranceformed - 01-04-2013

You still can if you ever catch Travis (KPWSerpiente) here on the east coast Wink

Project: 2012 DGM WRX - FlaakCM - 01-04-2013

Stopped by MachV today and picked up a Kartboy Pitch Stop Mount.

[Image: jubusube.jpg]

Re: Project: 2012 DGM WRX - FlaakCM - 01-07-2013

Well, I ended up being called in this weekend to fix an issue we were having with the servers and pulled a 27 hour shift. :roll:

I decided to take today off and sleep in. While I was home, I decided that I would install the new Kartboy Pitch Stop Mount. Install was fairly easy, except that one bolt was giving me trouble trying to take it off.

Below are the pictures of the install:

First I had to remove the by-pass valve (BPV) and the Top Mount Intercooler (TMIC)
[Image: DSC_0482_zps42d01f9e.jpg]

The pitch stop mount is located right below the TMIC
[Image: DSC_0743_zps874a50c9.jpg]
[Image: DSC_0744_zpsa62deda0.jpg]

Once the bolts are removed, you can easily pull out the stock pitch stop mount
[Image: DSC_0748_zpsa4671199.jpg]

Here a few photos of the stock pitch stop and the Kartboy pitch stop
[Image: DSC_0751_zps32df6f1a.jpg]
[Image: DSC_0752_zpse74bfb3b.jpg]

Installation is the reverse of removing the original
[Image: DSC_0753_zps98d10f4f.jpg]
[Image: DSC_0754_zps22e07315.jpg]

After the Kartboy Pitch Stop Mount is in, just reinstall the TMIC and the BPV.

All and all, the install only took about 45 mins.

I havent taken the car out yet to test how it feels. But I will post some reviews after a bit of driving. :mrgreen:

Re: Project: 2012 DGM WRX - FlaakCM - 01-07-2013

Teaser shot for summer!!

[Image: DSC_0756_zps9523b6f7.jpg]

Project: 2012 DGM WRX - JPolen01 - 01-07-2013

For a second I thought you were going with the donk look. Then I realized they weren't actually on haha. Dude if you tackled that pitch stop by yourself, you can definitely do the up pipe and exhaust!

Project: 2012 DGM WRX - FlaakCM - 01-07-2013

I probably can. Just lack of ramps/stands and muscle.

Re: Project: 2012 DGM WRX - Jake - 01-07-2013

FlaakCM Wrote:I probably can. Just lack of ramps/stands and muscle.

I have at least seven jack stands in my garage. Call me maybe.

Project: 2012 DGM WRX - FlaakCM - 01-07-2013

Jake Wrote:I have at least seven jack stands in my garage. Call me maybe.

Haha. Thanks! I will if I ever get the exhaust.

Re: Project: 2012 DGM WRX - Kaan - 01-10-2013

you can borrow an actual wrench and not use an adjustable if you want too Wink

Project: 2012 DGM WRX - FlaakCM - 01-10-2013

Kaan Wrote:you can borrow an actual wrench and not use an adjustable if you want too Wink

Haha. It was a slight PITA as it is getting old and rusted. However, just haven't found a reason to pick up a set of wrenches yet

Re: Project: 2012 DGM WRX - Kaan - 01-10-2013

its thursday, thats a good enough reason for me to pick up a set of wrenches. Wink

Project: 2012 DGM WRX - FlaakCM - 01-10-2013

Haha