+- Madison Motorsports (https://forum.mmsports.org)
+-- Forum: Technical (https://forum.mmsports.org/forumdisplay.php?fid=4)
+--- Forum: Member's Projects (https://forum.mmsports.org/forumdisplay.php?fid=12)
+--- Thread: Project: 1976 911S (/showthread.php?tid=10210)
RE: Project: 1976 911S - Apoc - 01-21-2020
(01-21-2020, 02:04 PM)ScottyB Wrote: in all honesty that green color is amazing. its so well suited to that car's character.
The 70s were the Porsche color heyday, if you ask me. The car wasn't even clean and it was raining a bit, but the lighting just worked on getting the green to pop. I offered to let them use it as a prop for an upcoming meet up. Some of these guys (admins) are the ones doing those fantastic videos you see on BaT, so I'd love to see what they come up with. They wanted to target doing something during sunset in the spring.
RE: Project: 1976 911S - Apoc - 01-22-2020
Here's a picture for those of you that prefer more car, less model.
![[Image: UgIWKmG.jpg]](https://i.imgur.com/UgIWKmG.jpg)
RE: Project: 1976 911S - .RJ - 01-22-2020
remove those foglights, please and thank
RE: Project: 1976 911S - rherold9 - 01-22-2020
(01-22-2020, 03:31 PM)Apoc Wrote: Here's a picture for those of you that prefer more car, less model.
Thank you. Now I can actually fap
RE: Project: 1976 911S - Apoc - 01-22-2020
(01-22-2020, 04:35 PM).RJ Wrote: remove those foglights, please and thank
Will PM address so you can send me some hood mounted Hellas.
RE: Project: 1976 911S - .RJ - 01-23-2020
(01-22-2020, 07:22 PM)Apoc Wrote:(01-22-2020, 04:35 PM).RJ Wrote: remove those foglights, please and thank
Will PM address so you can send me some hood mounted Hellas.
no foglights required, this isnt a fucking rally car (although, a safari 911 would probably be easier to drive in seattle)
RE: Project: 1976 911S - Apoc - 01-23-2020
Seems dumb to uninstall working lights on a road vehicle.
Project: 1976 911S - JPolen01 - 01-23-2020
Are the fog lights aftermarket? Or not original to that car? I'm sure it's nice to have the extra light but I'm with RJ - they look out of place. I think it's the rectangular shape.
RE: Project: 1976 911S - .RJ - 01-23-2020
(01-23-2020, 12:57 PM)JPolen01 Wrote: I think it's the rectangular shape.
100%. Its an 80's afterthought.
RE: Project: 1976 911S - Apoc - 01-23-2020
The fog lights are OEM for the car.
RE: Project: 1976 911S - Sijray21 - 01-24-2020
(01-22-2020, 03:31 PM)Apoc Wrote: Here's a picture for those of you that prefer more car, less model.[emoji7]
I love reflection shots. Such a good looking car, especially in that color. I really want a proper bright green car in my life at some point.
RE: Project: 1976 911S - ScottyB - 01-24-2020
that's such a good shot. i don't care what RJ says, put big pizza platter sized CIBIE's on everything
Project: 1976 911S - D_Eclipse9916 - 01-24-2020
(01-22-2020, 03:31 PM)Apoc Wrote: Here's a picture for those of you that prefer more car, less model.
Thank you.
RE: Project: 1976 911S - Senor_Taylor - 11-05-2020
How is this car doing?
RE: Project: 1976 911S - Apoc - 11-05-2020
Still rotting in my garage. I take it to run errands on occasion, but it's not uncommon for me to go five days without leaving the house so it's not like I'm putting a ton of miles on any car. I run it 3-4x/week, which it prefers over sitting for days at a time.
New shocks were on the docket before I went on medical leave last year. I got a new job about two weeks after COVID broke out, so I haven't had any real reason to chase that to this point. I'll probably get more serious about that next spring.
RE: Project: 1976 911S - .RJ - 11-05-2020
at the rate that your local shop gets through jobs, might as well get it in now. and put a smaller master cylinder in it.
RE: Project: 1976 911S - Apoc - 11-05-2020
(11-05-2020, 12:52 PM).RJ Wrote: at the rate that your local shop gets through jobs, might as well get it in now. and put a smaller master cylinder in it.
I like the work that shop does but dealing with the laid back west coast owner drives me nuts.
My kingdom for a shop that does good work at a decent price where I can work out all the parts details and scheduling via timely response emails.
Project: 1976 911S - davej - 11-05-2020
There's probably one out here. Buy me a plan ticket and I'll drive it back, I'm sure we'll find you something.
RE: Project: 1976 911S - Apoc - 02-15-2021
So this happened. The car hadn't been out of the garage all winter, so I took it to get gas and visit the asian market. A cold, wet morning, metal joints on a bridge, and likely underinflated tires got me into a tank slapper on a single lane bridge. I'd estimate my speed to be about 35 mph. After the third attempt to save it, I went both feet in and prepared to pinball from concrete wall to concrete wall. The car pivoted 90° to the right and slid sideways down the road with only the front bumper coming in contact with the right wall. No body panels were damaged - just the front bumper, valence, and fog lights. Got really lucky. I was able to drive it home and park it in the garage. Perhaps the oddest side effect, which I didn't realize until days later, is the windshield popped out.
I've called around a few shops but I'm having a helluva time finding people to work on a car this old. My only real choice is restoration shops or to do the work myself; then finding a painter. For now, I'm just trying to get the windshield back in. I'm on my 4th or 5th try and think I may have found my guy. He does glass installs for restorations and said he'd come look at it for $30 and no warranty. Apparently these windshields are a total fucknut and installing them requires the hard to find gasket, linseed oil, cordage, and two people - one to push from outside and one to pull the cords from the inside. I'm guesstimating a 50/50 shot this one goes back in without breaking.
I thought about going big time with new fiberglass bumpers but have ruled it out. I just don't think they're practical given I live in a city do use it for errands on occasion. I think I might be able to get away with repainting the bumper and putting new rubber molding in. The valance will need to be replaced, but the car can be driven as is. Probably the biggest decision is what to do with the fog lights, as I've always wanted to move then but don't want to drill for it. Really, just gonna take it one step at a time and see where we end up.
In case you were wondering, driving three pedals with kimchi everywhere is about as difficult as it looks.
![[Image: zRwSrkL.png]](https://i.imgur.com/zRwSrkL.png)
RE: Project: 1976 911S - Sijray21 - 02-15-2021
i saw that on IG and i couldn't bare to click the 'like' button. That really sucks about the car and the *gasp* wasted Kimchi.
i hope the repairs go well.